Define the operation first.
A slot description can refer to different machining methods. Share the intended machine cycle, slot dimensions and the required edge or hole quality so the tool family can be checked.
Send the slot requirements
- Slot width, length and board thickness.
- Internal corner and dimensional requirements.
- Substrate and support arrangement.
- Machine cycle and any current tool reference.
Toolpath, lateral loading and machine capability should be reviewed before trialling a tool.
Catalogue dimensions
Selected catalogue sizes are shown below. All dimensions are in millimetres. Ranges describe the tool family, not every possible diameter and length combination. Confirm the exact specification and current availability before ordering.
| Cutting diameter (mm) | Flute length (mm) |
|---|---|
| 0.40–0.50 | 5.5 |
| 0.55–0.65 | 6.7 |
| 0.70–3.00 | 8.7 |
Catalogue dimensions are selection references and do not represent a live stock list.
Before requesting a quotation
Send your required dimensions, board material and estimated quantity. Final geometry, availability, lead time and commercial terms are confirmed in the quotation.
Discuss your requirements ↗